Valves
Valves
Types: Bellow Sealed Valve
Mfg. Std.: API 602 / MSS SP -117 / API 600 / API 6D
End Connection : Flange / Buttweld / Socket Weld / screwed
Size:15NB-600NB
Class: 150# - 1500#
Types: Globe | Angular | “Y” Type | Bellow Seal Control
3 Way (Straight “T” or “Y”) Type
Mfg. Std.: ANSI / ISA 75.01.01 / ANSI / FCI 70.2 Class Vi (Soft Seat) Tight Shut Off / Class IV Metal to Metal Seating
End Connection : Flange / Buttweld/ Socket Weld / screwed
Size:15NB - 450NB
Class: 150# - 1500#
Types: Ball / Butterfly / Gate / Globe / Check / Diaphragm
Mfg. Std.: ASME/ API / /BS / DIN
Lining Material : PTFE | PFA | FEP | ETFE | PVDF
Size: 15NB - 600NB Class: #150 - #2500
Types: Pop / Angle / Bronze / High Pressure
Mfg. Std.: API 520, API 526, API 527, EN ISO 4126 Part.1, ASME Section VIII Div.
End Connection : Threaded BSP, BSPT, NPT, etc) / Flanged(ANSI B 16.5 R.F)
Size: 15NB - 200NB
Pressure Rating: 0.5 to 414 Barg
Types: Floating/ Trunnion (one / two / Three (L/T Port)
Mfg. Std.: API 6D | ISO 17292 / ASME B16.34 / API 607
End Connection : Flange / Buttweld/ Socket Weld / screwed
Size:15NB-300NB
Class: 150# - 1500#
Types: Concentric Single / Double Offset / Lug Type / Wafer Type
Mfg. Std. : API 609 / EN 593 / MSS SP 67 / ISO 5752
End Connection : Flange / Buttweld/ Lug/ Wafer Type
Size: 50NB-600NB
Class: 150# - 600#
Types: API / Forged / Lined
Mfg. Std. : API 600, API 602, ASME B16.34, BS 5150, ISO 10434
End Connection : Flange / Buttweld / Socket Weld / screwed
Size: 15NB-600NB
Class: 150# - 2500#
Types: Angle / Forged / Pressure Seal / API
Mfg. std.: API 623 / API 602 / ASME B16.34 / BS 1873
End Connection : Flange / Buttweld / Socket Weld
Size: 15NB - 600NB
Class: #150- #2500
Types: Swing / Lift / Single / Lined / Piston / Dual
Mfg. Std.: API 6D / API 602 / API 594
End Connection : Flange / Buttweld / Socket Weld / screwed
Size: 50NB - 600NB
Class: #150- #2500
Rotary & Linear Actuators
Torque: 5 Nm to 5,000,00
Limit Switches / Control Stations
Certifications: IP 66 to 68 / CE marking / Ex d, IIC, T6 / RoHs
Type :Butterfly Type Damper / Louver Type Damper / Guillotine Damper / Multilouver Damper
Mfg. Std.: BS 5155 / IS 13095 / API 609 / DIN EN 1092 / Custom Fabrication Standards
End Connection : Flanged (ANSI/DIN/BS), Wafer Type, Lug Type, Welded Ends
Size Range: 100 mm to 3000 mm (4” to 120”) – Custom sizes available on request
Type: Plug Valve
Mfg. Std.: API 599 / API 6D / ASME B16.34
End Connection: Flanged, Screwed, Socket Weld, Butt Weld
Size Range: ½” to 12” (DN15 to DN300)
Automation
TYPE : Rotary Actuators
Torque: 5 Nm to 5,000,00
Rotation: Angle 30° to 360°
Working Temperature : - 60°C to 200°C
Noise Level : 50 dB to 65 dB
Pressure: 1 bar to 12 bar
Material: Aluminium, stainless steel, cast iron, carbon steel, etc.
Type:Rack & Pinion Actuator
Torque: 5 Nm to 5,000,00
Rotation: 0° to 180°(Bidirectional)
Working Temperature : - 60°C to 200°C
Noise Level : 50 dB to 65 dB Pressure: 1 bar to 12 bar
Material: Aluminium, stainless steel, cast iron, carbon steel, etc.
Type : Scotch & Yoke Actuator
Torque: 20 Nm to 5,000,00
Rotation: 0° to 92° (Bidirectional)
Working Temperature : - 60°C to 200°C
Noise Level : 50 dB to 65 dB Pressure: 1 bar to 12 bar
Material: Aluminium, stainless steel, cast iron, carbon steel, etc.
Type : Linear Actuator
Air Supply : EN ISO228 G1/2”, G1”, G1.1/2”
Operating Temperature : - 60°C to 200°C
Pressure : 2 bar to 10 bar Noise Level : 50 dB to 65 dB
Material: Aluminium, stainless steel,composites, etc.
Type : Diaphragm
Stroke Length: 10–100 mm
Temperature Range: -20°C to +80°C
Actuation Methods: Manual, Pneumatic, Electric
Body Materials : EPDM, PTFE, FKM
Certification: NAMUR, ATEX, ICEX, ISO 5211
Type: Limit switch Box
Voltage Rating : 24V DC Terminals : 2(max 4)
Body Materials : ALUMINIUM PRESSURE DIE CAST
Communication Protocols : HART / Mod Bus Profibus Etc
Certification : IP 66 to 68 / CE marking / Ex d, IIC, T6 / RoHs
Type : Local Control Station
TERMINAL : 60 Temperature Range: -40°C to +80°C
LED indications : POWER,READY, OPEN, CLOSE
Body Materials : ALUMINIUM PRESSURE DIE CAST
Certification: IP 66 to 68 / CE marking / Ex d, IIC, T6 / RoHs
Instrumentation Valve
Types: Ball valve / Needle Valve
Mfg. Std.: MESC SPE 77-170,ASME B16.34,ISO 10497
End Connection : Flange x Fhread, Flange x Thread
Size: 8 NB - 100 NB Class: #150 - #2500
Types: Ball Valve | Globe Type Needle Valve
Mfg. Std.: MESC SPE 77-170 / 130 / 165 / ASME B 16.34
End Connection : Threaded - NPT, BSPT, BSPP / Flanged - ANSI, DIN
Size: 8NB - 100NB
Class: 150# - 2500#
Types: Instrumentation Ball Valve
Mfg. Std.: API 598, ISO 9001, ASME B16.34
End Connection : Threaded - NPT, BSPT, BSPP / Butt Weld, Socket Weld / Flanged - ANSI, DIN
Size: 1/4” to 2” Class: Up to 15000 PSI
Types: Instrumentation check valve
Mfg. Std.: MSS SP-99, API 598, ASME B16.34, and ISO 9001
End Connection : Threaded - NPT, BSPT, BSPP / Butt Weld, Socket Weld / Flanged - ANSI, DIN
Size: 1”- 12” Class: Up to 15000 PSI
Types: High Pressure Needle valve
Mfg. Std.: MSS SP-99, API 598, ASME B16.34, and ISO 9001
End Connection : Threaded - NPT, BSPT, BSPP / Welded / Flanged - ANSI, DIN
Size: 1/8” to 2”
Class: Up to 15000 PSI
Types: 2 valve, 3 valve, 4 valve, 5 valve (R / E / T / H / S/ A / Coplanar) Manifold
Mfg. Std.: MSS Sp99
End Connection : DIN EN 61518, Screwed End
Size: 15 NB - 600 NB
Class: 150PSI - 6,000PSI